Heat is essential in our day to day lives. We need heat to warm food, our surroundings, and water. The most cost-effective way to warm your home is by using a boiler. A boiler is an enclosed system that provides a method of ignition and transfers heat to water. The water is heated to preferred temperatures generally referred to as hot or steam. The hot water is then expected to pass the heat to a process.
Heating your house, especially during winter, is paramount. Therefore, installing a boiler in your residence is an exceptional decision that requires long term commitment. The size of your family dictates the size of the boiler you need.
How Does Boiler Work?
The first thing is to select the temperature you want. Then turn on the boiler to heat water to the selected temperature. Boilers either burn oil or gas to produce heat. The heated water is then let out via radiators and runs through a tube that is fitted under your flooring. The hot water releases heat to the surrounding, and it returns to the boiler so that it can be reheated, and the cycle continues.
Installing A Boiler
Boilers are a cost-effective way of heating your home. They are environmentally friendly and use less energy to heat your surroundings. Coldwater gets into the boiler, and it is cycled through heated pipes. The water is heated to the temperature of your liking and then distributed around your house as steam or hot water. Here is the process and what to consider when installing a boiler.
Location
When it’s a new boiler installation, you need to consider the location of your boiler installation. The best place to install your boiler is near water lines, an electrical outlet, and gas lines. You should also ensure that the floor or ground is level.
Dressing the Boiler
As the name suggests, dressing means adding required tubes to the system. The process kicks off with adding circular pipes to the boiler, then the riser nipple. Then you can embark on adding pipes that will be flowing water around your home. Remember to fit the right size of riser nipples. Then you can go on and attach pipes that distribute water to various areas in your home.
Flue Installation
Remember, a boiler system heats water to high temperatures. Therefore, it is prudent to fit a flue or a smoke pipe. A metal pipe is recommended to connect the boiler to the smoke pipe.
Attach the Gas Line
Your boiler requires a fuel source to operate. If you bought a gas boiler, then your need to attach it to the gas line. You can read more about the required gas pipes in the boiler manual.
After you are done with the installation process, open the water line for water to fill, switch on the boiler, and set the preferred temperature.
Why Should You Prioritize Fitting A Boiler in Your Home?
Easy to Maintain and Repair
A boiler has few moving parts. This means that there is less friction, which causes wear and tear. Boilers rarely encounter repair issues, and when they occur, they are cheap to fix compared to other heating systems. However, ensure that your boiler is inspected annually.
Energy Saving
Though boilers are relatively expensive to install, the running cost is relatively cheap. Water is more functional in transferring heat compared to air. So, it’s easy to move heat through water than in air.
Spreads Heat Evenly
Forced water heaters blow out hot air that collects at the top of a room. Therefore, it takes a lot of time for the hot air to spread and accumulate the whole space. This means that the area will be unevenly heated. On the other hand, heat from boiler systems spreads evenly through the entire space. With a boiler system, you will experience fewer cold spots in your house.
Spreads Heat Evenly
Forced water heaters blow out hot air that collects at the top of a room. Therefore, it takes a lot of time for the hot air to spread and accumulate the whole space. This means that the area will be unevenly heated. On the other hand, heat from boiler systems spreads evenly through the entire space. With a boiler system, you will experience fewer cold spots in your house.
More Durable
As said earlier, boilers have few moving parts. We all know that wear and tear is mostly caused by friction. In addition, forced air systems consist of a blower fan and a motor. Fans and motors require regular maintenance to serve you longer. On the contrary, boilers have fewer mechanical parts, thus undergoes less stress as they operate.
We have made a name in installing boilers. As you make this critical long-term decision, please speak to one of our members for assistance. Click here to talk to a professional installer and end up with the best home heating solution.
